If you spend long hours on the water, you already know how important a high-quality performance fishing shirt is. Shirts like the ones from Dagon Fishing wick moisture, block UV rays, and move with you. But getting wrinkles out of technical fabrics can be a little tricky, particularly since most of them consist of polyester, nylon, or blended performance fibers. This guide walks you through safe and effective ways to remove wrinkles, avoiding creases, and taking good care of your fishing shirts to keep them sharp and in good condition.

Know Your Shirt’s Fabric

The vast majority of performance fishing shirts currently manufactured, such as Dagon Fishing shirts, are produced in polyester, nylon, or mixed synthetics. These fabrics are lightweight, breathable, fast-drying, and often treated with UPF or moisture-wicking finishes.  

But these features, which make them ideal for fishing, are the same characteristics that make them sensitive to high temperatures. That’s why it’s important to pay attention to ironing, drying, and washing temperatures.

Washing to Avoid Wrinkles in the First Place

The easiest way to deal with wrinkles is to prevent them in the first place.  

The following are the best practices in washing:  

- Cold water - preferably less than 27°C (80°F).  

- Wash using a light liquid detergent- do not use powder detergents.  

- Skip fabric softeners; they clog the tiny fibers that allow breathability and moisture wicking.  

- Wash shirts inside out to preserve UV coating, prints, and logos.  

• Do not use abrasive objects such as jeans, Velcro straps, and heavy zippers that can cause friction.  

For drying:  

- Air dry only. Hang your shirt in the shade using a padded hanger.  

- Avoid direct sunlight because it weakens synthetic fibers over time.  

- Do not wash at high temperature in the dryer machine- it can destroy the performance fabric.  

By taking these steps, 70-80 percent of wrinkling problems are already eliminated.

How to get rid of wrinkles: safe and effective ways

When you already have wrinkles in your fishing shirt, these methods will remove the wrinkles without damaging the fabric coating and elasticity.

A. Steamer (Recommended Method)  

A steamer is the best method because it relaxes fibers without direct heat.  

Steps:  

1. Hang your shirt on a hanger.  

2. Hold the steamer one to two inches off the fabric.  

3. Slowly move over the sleeves, chest, and back.  

4. Let it dry on the hanger.  

Polyester-based fishing shirts are also good for steaming.

B. Ironing, but Only When Necessary

If you choose to iron:  

- Turn the heat to the low position or the synthetics position.  

- Turn the shirt inside out.  

- Between the shirt and the iron, a thin cotton cloth or towel should be placed.  

- Light pressure- press and lift, do not drag the iron.  

Dragging the iron can stretch the fibers or distort printed logos.

C. The Damp Towel + Steam Trick  

It is ideal when you do not have a steamer:  

1. Wet a towel (do not drip).  

2. Place the shirt on a table or a bed.  

3. Place the damp towel on top.  

4. Press gently with your hands.  

5. Let the shirt sit in a hot, steamy bathroom for 10 to 15 minutes.  

This technique incorporates soft water, which is a natural relaxant for wrinkles.

Post-Care Advice on Preventing Future Crevices

- Shirts should be hung immediately after washing to prevent set-in wrinkles. 

- Padded or wide hangers are used to hold the shoulders in shape.  

- Do not store performance shirts folded for long periods. Synthetics can develop permanent creases.  

- Turn your fishing shirts so that you do not have to wash the same shirt more frequently than the other.  

• Keep them in a cool, dry place to preserve the quality of the fabric.

Fishing Apparel Dagon Caring

Dagon Fishing clothing have the following features:  

- Waterproof breathable fabric.  

- UPF 30+ sun protection  

- Vented mesh backs  

- Stretch panels  

- Water‑resistant pockets  

- Due to such sophisticated functions:  

- Do not apply bleach, which kills UPF coating.  

- Do not wash or dry with high temperatures, as this destroys elasticity.  

- When steaming or ironing, be careful of pockets that are water-resistant, zippers, or printed areas.  

- Always dry in the shade, never in direct sunlight.  

These shirts can last years with proper care, and they can still be comfortable in performance.

Removing Deep Wrinkles caused by Travel or Storage

In case your fishing shirt has been squashed in a piece of luggage or packed in a gear bag:  

1. Hang the shirt as soon as it is unpacked.  

2. Spray lightly the wrinkled areas with water.  

3. Hang the shirt in a steamy bathroom to loosen deep wrinkles.  

4. In case needed, iron on low heat with the use of a protective cloth.  

The wrinkles will be pushed out within a few minutes, and the shirt will go back to being smooth.

Final Thoughts  

Wrinkles may seem minor, but improper care can shorten the life of the fabric, weaken UPF protection, and hurt breathability. With proper washing, drying, and steaming, you can have your Dagon Fishing performance shirts looking good, comfortable, and ready to go on any outdoor adventure.  

A well-kept fishing shirt not only looks sharp, it performs better too. Keep your equipment in good condition, and it will take good care of you each cast, each chase, and every day on the water.